The following videos each provide a brief introduction on setting up your rapidly deployable wireless camera from Netarus. For an electronic copy of a user manual, please contact Netarus support at http://support.netarus.com.

(Access to YouTube is required to view the following introductory videos)



This video shows how the rapidly deployable wireless armored dome camera HoistCam HC185 from Netarus can be setup in under 2 minutes from case to bench. Video includes opening the case, powering on the monitor, connecting the antenna, and powering on the camera.




Video #2 - How to Setup HoistCam HC145 Low-Profile

This video shows how the rapidly deployable wireless low profile camera HoistCam HC145 from Netarus can be setup in under 2 minutes from case to bench. Video includes opening the case, powering on the monitor, connecting the antenna, and powering on the camera.




This video shows to program the joystick on the HoistCam HC195 camera positioning using the PRESET and SHOT button on the joystick. The video includes an overview of programming a PRESET and recalling the PRESET using the SHOT button on the joystick.




Video #4 - HoistCam HC185 Zoom, Focus and Orientation

Learn how to remove the armored dome of a HoistCam HC185, adjust the zoom, focus and orientation, and properly secure the armored dome back to the housing.




Video #5 -HoistCam Monitor Mounting and Setup

In this video, we will be going over the setup and configuration of the HoistCam monitor's RAM Mount suction cup as a temporary or removing the suction cup mount and screwing in the mount into a permanent surface.




Video #6 - HoistCam External Battery Pack

Learn how to properly connect, power on and disconnect the external battery pack for any HoistCam.




Video #8 - Advanced: Configure HoistCam Director with PTZ HD Camera

The following is an advanced configuration of HoistCam Director MDVR with multiple camera. Learn how to properly connect the HoistCam Director, power on the PTZ, connect the joystick and connect all of the cabling for proper operation prior to installation.




Video #5 - HoistCam Director MDVR Setup

This video goes over the setup of the HoistCam Director MDVR.




Video #9 - How to Configure WiFi on HoistCam Director MDVR

The following video shows how to configure the SSID name and password when using the HoistCam Director MDVR and Wifi. This does not apply to using cellular service. Also, the Wifi antenna must be connected in order for the MDVR to receive a Wifi signal. Note: SSID must be all characters with no spaces and the password is limited to 12 characters.




Additional Resources